Country Research Reports

Trends, opportunities and forecast in Composite Preforms Market in MENA to 2028 by end use industry (aerospace, automotive, consumer goods, infrastructure, medical, and marine), technology (weaving, braiding, stitching, and knitting), and fiber type (carbon fiber, glass fiber, and others)

Trends, opportunities and forecast in Composites Market in MENA to 2028 by application type (transportation, marine, wind energy, aerospace, pipe & tank, construction, electrical & electronics, consumer goods, and others), raw material (glass fiber, carbon fiber, aramid fiber, polyester resin, vinyl ester, phenolic, polyurethane, thermoplastic resin, filler, and others), fiber type (glass fiber composites, carbon fiber composites, and aramid fiber composites), and resin type (polyester composites)

Trends, opportunities and forecast in Carbon Fiber Textile Market in MENA to 2028 by end use industry (aerospace & defense, transportation, wind energy, marine, construction, and others) and product type (woven and non-crimp)

Trends, opportunities and forecast in Short Fiber Thermoplastics Market in MENA to 2028 by end use industry (transportation, consumer goods, electrical/electronics, and others), fiber type (glass fiber, and carbon fiber), and resin type (PP, PA, PBT, and others)

Trends, opportunities and forecast in Polyetheretherketone (PEEK) Market in MENA to 2028 by end use industry (electronics, oil & gas, aerospace, medical, automotive, and others) and usage (unfilled, carbon composites, and glass composites)

Trends, opportunities and forecast in Long Fiber Thermoplastics Market in MENA to 2028 by end use industry (automotive, consumer goods, industrial, and others), material form (LFRT and D-LFT), reinforcement type (glass fiber and carbon fiber & others), and resin type (polypropylene, polyamide, and others)

Trends, opportunities and forecast in Spray Foam Insulation Market in MENA to 2028 by product type (closed cell and open cell), infrastructure type (residential, commercial, and others), and application (wall insulation, roof insulation, concrete rehabilitation, and others)

Trends, opportunities and forecast in Low Dielectric Resin Market in MENA to 2028 by resin type (fluoropolymer, cyanate ester, cyclic olefin copolymer, m-PPE, polyimide, PET, and others) and application (PCB, wire & cable, antenna, microelectronics, radome, and others)

Trends, opportunities and forecast in Pharmaceutical Packaging Market in MENA to 2028 by product (bottles, caps and closures, parenteral containers, blister packs, pre-fillable syringes, pre-fillable inhalers, pouches, and others), material (plastic, glass, paper and paperboard, aluminum foil, and others), and end user (pharmaceutical manufacturer and contract packaging)

Trends, opportunities and forecast in Nanocoating Market in MENA to 2028 by end use industry (construction, automotive, healthcare, marine, electronics, energy, and others), function type (self-cleaning and easy-to-clean, anti-fingerprint, anti-microbial, anti-fouling, and others), and application by substrate type (metal, glass, plastic, and others)

Trends, opportunities and forecast in Polytetrafluoroethylene (PTFE) Market in MENA to 2028 by form type (micronized powder, granular, fine powder, and aqueous dispersion), application (ink and coatings, plastics, grease and lubricants, and others), and end use industry (industrial processing, electrical and electronics, automotive, construction, healthcare, and others)

Trends, opportunities and forecast in Fluoropolymer Film Market in MENA to 2028 by product type, which includes polytetrafluoroethylene (PTFE), polyvinylidine fluoride (PVDF), fluorinated ethylene propylene (FEP), polyvinyl fluoride (PVF), perfluoroalkoxy alkane (PFA), ethylene tetrafluoroethylene (ETFE), and others (ECTFE, PCTFE, and TVH) and by end use industry such as electrical and electronics, construction, packaging, transportation, industrial, and other end use industries

Trends, opportunities and forecast in Waterproofing Admixture Market in MENA to 2028 by product type (crystalline, pore blocking, and others) and by end use (residential, commercial, and infrastructure)

Trends, opportunities and forecast in Phenolic Resin Market in MENA to 2028 by application (wood adhesive, molding compound, laminates, insulation, Coating, Paper Impregnation, and others), end use industry (construction, transportation, electrical and electronics, furniture, Industrial, and others), and resin type (resol and Novolac resin)

Trends, opportunities and forecast in MDI based Polyurethane Market in MENA to 2028 by application (rigid foam, flexible foam, coating, adhesive and sealant, and elastomer) and end use industry (building and construction, appliance, transportation, furniture and bedding, footwear, packing, general/ industrial engineering, and others)

Trends, opportunities and forecast in Optical Film Market in MENA to 2028 by product (polarizer film, BLU film, and ITO film) and end use (television, monitor, notebook, mobile phone, and others)

Trends, opportunities and forecast in Ethylene Vinyl Acetate Market in MENA to 2028 by application (film, foam, adhesives, and others), end use industry (packaging, solar, agriculture, wire & cable, automotive, footwear, and others), and by density (very low density EVA, low density EVA, medium density EVA, and high density EVA)

Trends, opportunities and forecast in Plastic Additive Market in MENA to 2028 by product type (plasticizers, flame retardants, pigments, stabilizers, impact modifiers, antioxidants, blowing agents, and others), end use industry (construction, packaging, automotive, consumer goods, and others), plastic type (polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), other commodity plastics, engineering plastics, and high performance plastics), and by function (property modifiers, property stabilizers)

Trends, opportunities and forecast in Release Liner Market in MENA to 2028 by application (pressure sensitive label stock, tapes, industrial, hygiene, graphic art, medical, envelopes and packaging, and others), substrate (art paper, film, glassine, polyolefin paper, and other substrates), label format (adhesive applied, in-mold, pressure sensitive labelling, sleeving, and others), and material type (silicone and non-silicone)

Trends, opportunities and forecast in Glass Fiber Market in MENA to 2028 by application (marine, transportation, pipe and tank, aerospace, construction, electrical and electronics, consumer goods, wind energy, and others), fiber type (E/ECR glass fiber, S glass fiber, C glass fiber, and others), product type (single end roving, multi end roving, woven roving, fabrics, CSM, CFM, DUCS, and CS), and manufacturing process (hand layup, spray up, resin infusion, pultrusion, injection molding, and compression molding)

Trends, opportunities and forecast in Filled Thermoplastics in the Asian Consumer Goods Market in MENA to 2028 by application (consumer appliances, electrical & electronics, power tools, and others), material type (mineral filled, and fibers), and resin (PP, PA, PBT, PC, and others)

Trends, opportunities and forecast in Ceramic Core Market in MENA to 2028 by end use industry (aerospace, industrial gas turbine, and others), material (silica, zircon, and other), and sourcing type (outsource and in-house)

Trends, opportunities and forecast in Composite Materials in the Sporting Goods Market in MENA to 2028 by application (golf clubs/shafts, hockey sticks, rackets, bicycle parts, skis/snowboards, fishing rods, and others), reinforcement (carbon composites, glass composites, and others), resin (epoxy, polyamide, and others), and process (prepreg layup, infusion, filament winding, wet layup, and others)

Trends, opportunities and forecast in Carbon Black Market in MENA to 2028 carbon black market by application (tire rubber, non-tire rubber, plastic, ink, coating, and others), end use industry (transportation, industrial, building and construction, printing and packaging, and others), and grade (commodity carbon black and specialty carbon black)

Trends, opportunities and forecast in Mold Release Agent Market in MENA to 2028 by material type (water, solvent, and other), product type (external, internal, and semi-permanent), and application (die casting, rubber, tire, concrete, plastic, food processing, and others)

Trends, opportunities and forecast in Flame Retardant Plastics Market in MENA to 2028 by end use industry (aerospace & defense, electrical & electronics, wire & cable, pipe & tank, building & construction, transportation, marine, and others), polymer type (PVC, polyolefin, polyurethane, ABS, PC, PA, PBT, epoxy, phenolic, polyester, vinylester, and others), and polymer group (thermoset and thermoplastic)

Trends, opportunities and forecast in bulk continuous filament yarn market to 2025 by application (carpet & rugs, mats, and others), polymer type (Nylon, Polyester, Polypropylene, and others), denier type (600-1200, 1200-1800, 1800-2400, and 2400-3000), and end use (residential, non-residential, and others)

Trends, opportunities and forecast in Adhesive Primer Market in MENA to 2028 by end use industry (automotive, construction, aerospace, electronics, packaging, and others), product type (silane, maleic anhydride, polyolefin, titanate & zirconate, and others), and substrate type (plastic & composites, metal, rubber, and others)

Trends, opportunities and forecast in Water Treatment Chemicals Market in MENA to 2028 by end use industry (municipal, power generation, pulp and paper, oil and gas, metal and mining, food and beverages, chemical processing, and others) and product type (coagulants and flocculants, corrosion inhibitors, scale inhibitors, biocides, pH stabilizers, foam control, and others)

Trends, opportunities and forecast in Carbon black tire Market in MENA to 2028 by application (passenger car tire, commercial vehicles tire, and others) and end user industry (OEM, and replacement)

Trends, opportunities and forecast in Organophosphorus Flame Retardant Market in MENA to 2028 by application type (polyurethane, polyvinyl chloride, engineering thermoplastics, acrylonitrile butadiene styrene, and others) and end use industry (building and construction, electricals and electronics, transportation, and others)

Trends, opportunities and forecast in Bitumen Emulsifier Market in MENA to 2028 by end use (roadways, roofing, and others), surface charge type (cationic, anionic, and non-ionic type), product type (unmodified bitumen emulsifier, and polymer modified bitumen emulsifier), application (surface dressing, prime coat, fog seal, tack coat, cold mix, micro surfacing, recycling, and others), and setting time (rapid, medium, and slow)

Trends, opportunities and forecast in Alumina Trihydrate (ATH) Flame Retardant in Composite Market in MENA to 2028 by end Use application (electrical and electronics, transportation, construction, consumer goods, and others)

Trends, opportunities and forecast in Continuous Fiber Thermoplastic Market in MENA to 2028 by end use industry (transportation, sporting goods, industrial, aerospace & defense, and others), material form (UD tapes, prepreg (fabric), commingled fiber and fabric, by reinforcement (glass, carbon, and others), use temperature (high temprature, and low temperature), and resin type (PP, PEEK, PPS, PA, PEI, PEKK, and others)

Trends, opportunities and forecast in Dope Dyed Yarn Market in MENA to 2028 by application (textile, automotive, home furnishing, and others), material type (Polyester, Nylon, and others), and denier type (30-250, 250-500, 500-1200, and 1200-3000)

Trends, opportunities and forecast in Boron Market in MENA to 2028 by source (mine source, salt lake source, and others), and application (glass, ceramic, fertilizer, detergent, and others)

Trends, opportunities and forecast in Compost Market in MENA to 2028 by product type (yard trimming, food waste, manure, mushroom compost, and vermicomposting) and application (agriculture, home gardening, landscaping, horticulture, construction, and other applications)

Trends, opportunities and forecast in Fillers in Personal Care Market in MENA to 2028 by filler type (mica, talc, kaolin, calcium carbonate, microsphere, bismuth oxychloride, silica, and others) and application (facial care, oral care, body care, hygiene care, and others)

Trends, opportunities and forecast in Expandable Graphite Market in MENA to 2028 expandable graphite market by product form (flame retardants, graphite foil & sheets, sealing & gaskets, and others), end use industry (building & construction, consumer electronics, chemicals, and others), and flake size (jumbo, medium & large, and small & fine)

Trends, opportunities and forecast in Polyolefin Film Market in MENA to 2028 polyolefin film market by material (HDPE, LDPE, LLDPE, BOPP, and CPP), technology (blown film extrusion, cast film extrusion, and others) film type (shrink, stretch, and linear film), and end use industry (packaging, construction, agricultural, and others)

Trends, opportunities and forecast in Composites Distributor Market in MENA to 2028 by end use industry (aerospace and defense, wind energy, automotive, marine, construction, pipe and tank, electrical/electronics, consumer goods, and others), raw material (roving, textile, polyester resin, vinylester resin, epoxy resin, and other resins), and intermediate (prepreg, SMC, BMC, SFT, LFT, CFT, and GMT)

Trends, opportunities and forecast in Thermoplastic Composites Market in MENA to 2028 by end use industry (transportation, consumer goods, construction, industrial, and others), material type (SFT, LFT, GMT, and CFT), reinforcement type (glass fiber, carbon fiber and other), and resin type (PP, PA, PBT, and others)

Trends, opportunities and forecast in Aerospace Maintenance Chemical Market in MENA to 2028 by product type (deicing/anti-icing, lubricant, and cleaning agent), lubricant market (turbine oils, piston engine oils, hydraulic fluids, and grease), and aircraft type (commercial & regional aircraft, general aviation, helicopter, and military aircraft)

Trends, opportunities and forecast in Microsphere Market in MENA to 2028 by applications (composites, medical technology, life sciences and biotechnology, cosmetics and personal care, paints and coatings, and others), material (glass microspheres, polymer microspheres, ceramic microspheres, fly ash (cenosphere) microspheres, metallic microspheres, and others), and product type (solid microspheres and hollow microspheres)

Trends, opportunities and forecast in PVC Compound Market in MENA to 2028 by application (film and sheet, wire and cable, pipe and fitting, flooring, profile and tubes, and others), end use (electrical and electronics, building and construction, packaging, automotive, and others), product type (rigid, and flexible PVC), and manufacturing process (injection molding, extrusion, and others)

Trends, opportunities and forecast in Automotive Insulation Market in MENA to 2028 by application (interior and under the hood), by product type (PU foam, elastomeric foam, glass wool, and others), by function (acoustic insulation and thermal insulation), and by vehicle type (passenger vehicle and light commercial vehicle)

Trends, opportunities and forecast in Fillers in the Food Market in MENA to 2028 by filler type (talc, calcium carbonate, cellulose, starch, flour, and others) and application (processed meat and seafood, dairy and bakery, food supplements, and beverage and others)

Trends, opportunities and forecast in Recovered Carbon Black Market in MENA to 2028 by application (tire, non-tire rubber, and others), by end use industry (transportation, industrial, building and construction, printing and packaging, and others), and by grade (commodity and specialty)

Trends, opportunities and forecast in Electrically Conductive Adhesives Market in MENA to 2028 by filler material (silver, copper, carbon, and others), end use (automotive, consumer electronics, aerospace and defense, biosciences, and others), resin (epoxy, silicone, acrylic, polyurethane, and others), type (isotropic and anisotropic), and form (paste and film)

Trends, opportunities and forecast in Coil Coatings Market in MENA to 2028 by end use industry type (building & construction, automotive, appliance, and others), resin type (polyester, fluoropolymer, siliconized polyester, plastisol, and other), and application type (steel and aluminum)