Country Research Reports

Trends, opportunities and forecast in BMI Prepreg Market in MENA to 2028 by end-use industry (defense, commercial aircraft, general aircraft and others), application (tooling, airframe, nacelles and others), reinforcement type (fabric/woven BMI prepreg and unidirectional BMI prepreg), and cure type (autoclave, out-of-autoclave, and others)

Trends, opportunities and forecast in Composites in the Passenger Rail Market in MENA to 2028 by application (floor, ceiling, seat structures, toilet module, wall panel, door, front end cab, and others), fiber (glass fiber, carbon fiber, & others), resin (epoxy, polyester, phenolic, vinyl ester, and others), and manufacturing process (RTM/VARTM, open mold, pultrusion, SCRIMP, injection molding, others)

Trends, opportunities and forecast in FRP Pipe Market in MENA to 2028 by application (oil and gas, retail fuel, water/wastewater, sewage, pulp/paper, chemical/industrial and others ), diameter (small (<18”), medium (18”-60”) and large (>60”)), resin (polyester resin based FRP pipe, epoxy resin based FRP pipe and vinyl ester resin based FRP pipe), pressure rating (less than 150 psi, 150-300 psi and more than 300 psi), and manufacturing process (filament winding, centrifugal casting and others)

Trends, opportunities and forecast in Carbon Fiber Market in MENA to 2028 by end use industry (aerospace, industrial, and sporting goods), precursor type, tow size, and modulus

Trends, opportunities and forecast in Polypropylene Compound Market in MENA to 2028 by end use (automotive, appliances, consumer electronics, packaging, industrial, and others), polymer type (homo polymers, random copolymers, and impact copolymers), and filler type (mineral filled, glass reinforced, compounded TPO/TPVs, and others)

Trends, opportunities and forecast in Ground and Precipitated Calcium Market in MENA to 2028 by application (paper, plastics, paint & coating, rubber, adhesive and sealant, and others), product (ground calcium carbonate and precipitated calcium carbonate), and end use industry (packaging, building and construction, printing, transportation, industrial, consumer, and others)

Trends, opportunities and forecast in Bio-Composites Market in MENA to 2028 by end use industry (building and construction, automotive, industrial and consumer goods, and others), process (extrusion, compression molding, injection molding, and others), resin (polyethylene, polypropylene, polyvinyl chloride, polylactide acid and others), and fiber (wood flour, flax, kenaf, hemp, jute and others)

Trends, opportunities and forecast in Cardiovascular Device Market in MENA to 2028 by type (cardiac rhythm management, interventional cardiac devices, peripheral vascular devices, cardiac assist devices, structural heart devices, cardiovascular surgery, electrophysiology, and diagnostic & monitoring devices) and device (pacemaker, defibrillator, stent, cardiac catheter, guidewire, heart valve, ECG, event monitor, and others)

Trends, opportunities and forecast in Wearable Medical Device Market in MENA to 2028 by end use type (healthcare, remote patient monitoring), application (diagnostic, therapeutic), and distribution channel (pharmacy and clinics, others and online)

Trends, opportunities and forecast in Digital Fitness Market in MENA to 2028 by product (smartwatch, fitness wristband, smart clothing, smart shoe, and other), category (hand wear, head wear, leg wear, and others), and application (smart wearable fitness device and smart wearable sports devices)

Trends, opportunities and forecast in Masterbatch Market in MENA to 2028 by product type (color, white, black, additive, and filler), carrier resin (PE, PP, PS, PC, PA, EVA, SAN, and ABS), end use industry (packaging, consumer goods, electrical and electronics, transportation, fiber and textiles, building and construction, and others), and by process (film extrusion, blow molding, injection molding, pipe, conducit and tubing, extrusion coating, sheet and thermoforming, wire and cable, rotational molding, and other)

Trends, opportunities and forecast in Aramid Paper Market in MENA to 2028 by type (para aramid paper and meta aramid paper) and by end use application segment (electrical insulation, honeycomb, and communication equipment others)

Trends, opportunities and forecast in Basic Petrochemical Industry in MENA to 2028 by chemical type (ethylene, propylene, butadiene, benzene, toluene, xylene, methanol, and ammonia) and application type

Trends, opportunities and forecast in Fluoropolymer Market in MENA to 2028 by product type (PTFE, FEP, PVDF, PVF, fluoroelastomer, and others) and end use industry (industrial processing, electrical and electronics, transportation, construction, healthcare, and others)

Trends, opportunities and forecast in Specialty Film Market in MENA to 2028 by product type (polyester, fluoropolymer, nylon, polyimide, polycarbonate, and others), function type (barrier, safety, decorative, microporous, and others), and end use industry (packaging, electrical and electronics, construction, automobiles, aerospace, and others)

Trends, opportunities and forecast in Hot Melt Adhesives Market in MENA to 2028 by application type (packaging, disposable hygiene products, pressure sensitive adhesives, automotive, construction, bookbinding, and others), polymer type (ethylene vinyl acetate based hot melt adhesives, styrene block copolymers based hot melt adhesives, polyolefin based hot melt adhesives, polyurethane based hot melt adhesives, and other hot melt adhesives), and product form (pellets, pillows, glue sticks, and others)

Trends, opportunities and forecast in Genetically Modified Seed Market in MENA to 2028 by crop type (corn, soybean, cotton, canola, and others) and trait type (herbicide tolerance, insect resistance, and others)

Trends, opportunities and forecast in Polyurethane Foam Market in MENA to 2028 by application type (building and construction, bedding and furniture, transportation, electrical and electronics, footwear and others), raw material (MDI based foam and TDI based foam), type (rigid, flexible, and spray foam) and density (high density foam and low density foam)

Trends, opportunities and forecast in Titanium Dioxide Market in MENA to 2028 by application type (Paint and Coatings, Plastics, Paper and Others), and product form (Rutile and Anatase)

Trends, opportunities and forecast in Epoxy Curing Agents in the Composites Market in MENA to 2028 by end use (wind energy, pipe and tank, aerospace, and others) and product type (aromatic amine, aliphatic amine, cycloaliphatic amine, catalyst, dicyandiamide, anhydride, and others)

Trends, opportunities and forecast in 3D Printing Materials Market in MENA to 2028 by end use industry (automotive, aerospace, consumer, medical, and others), material (photopolymers, thermoplastics, metals, ceramics, and others), and technology (fused deposition modeling, selective laser sintering/multi jet fusion, stereolithography/digital light processing, material jetting, others)

Trends, opportunities and forecast in PET Foam Core Market in MENA to 2028 by end use industry (wind energy, transportation, and building & construction)

Trends, opportunities and forecast in Thermoplastic Prepreg in the Transportation Market in MENA to 2028 of thermoplastic prepreg in the transportation market by end use industries (passenger car, bus and heavy truck and rail), application (exterior, interior, and others), fiber type (carbon fiber and glass fiber), and resin type (PP, PA, and others)

Trends, opportunities and forecast in Polyurethane Resin Composite Market in MENA to 2028 by end use industry (transportation, construction, and others), application (door, load floor, Cross arm, manhole cover, sunshade, door panel, utility pole, wind turbine blade, window frame and others), and manufacturing process (pultursion, reaction injection, injection molding, filament winding, and spray up process)

Trends, opportunities and forecast in Fiber Sizing Market in MENA to 2028 by fiber (glass, carbon, and others), end use industry (transportation, pipe & tank, construction, electrical & electronics, wind energy, marine, consumer goods, and others), component (film former, coupling agent, and additive & modifier), and film former type (epoxy, phenoxy, polyamide, polyurethane, polypropylene, and others)

Trends, opportunities and forecast in composite tube market to 2025 by end use industry (transportation, electrical, sports and leisure, telecommunication, industrial, robotics and automation, and others), fiber type (carbon fiber, glass fiber, and hybrid), manufacturing process (pultrusion/ pullwinding, filament winding, and others), and product type (round, profile, telescopic, and conical)

Trends, opportunities and forecast in Gelcoat Market in MENA to 2028 by end use industry (wind, marine, construction, transportation, tank, and others) and resin chemistry (polyester, vinylester, epoxy and others)

Trends, opportunities and forecast in FRP Tank in the Water and Wastewater Market in MENA to 2028 by application (wastewater, industrial wastewater, plumbing engineered solutions, water conservation, potable water, fire protection), installation (underground and aboveground), capacity (less than 5k, 5k-50k, and 50k-250k), and end use industry (municipal, industrial, residential and commercial)

Trends, opportunities and forecast in Phenolic Insulation Market in MENA to 2028 by end use industry (HVAC system, building and construction, industrial, and others) and application (duct, pipe, wall, roof, floor, and others)

Trends, opportunities and forecast in Mica Market in MENA to 2028 by end use (electrical and electronics, construction, paint and coating, personal care, and others), by grade (ground mica, sheet mica, and built-up mica), and by product type (natural and synthetic)

Trends, opportunities and forecast in Urea Formaldehyde Resin Market in MENA to 2028 by end use industry (furniture, building and construction, transportation, electrical and electronics, and others) and applications (medium density fiber board, plywood, particle board, adhesive, molding compound, and others)

Trends, opportunities and forecast in Cyanate Ester Resin Market in MENA to 2028 by product type (bisphenol-based cyanate ester and novolac-based cyanate ester), end use industry (aerospace & defense, electrical & electronics, automotive, marine, and others), and application (printed circuit boards, radomes, aerospace engine & structural parts, and others)

Trends, opportunities and forecast in Wollastonite Market in MENA to 2028 by application (polymer, ceramic, paint and coating, metallurgy, and others), by product type (natural and synthetic), by aspect ratio (high and low aspect ratio), and by end use industry (automotive, building & construction, industrial, electrical and electronics, and others)

Trends, opportunities and forecast in Biaxially Oriented Polyester (BOPET) Film Market in MENA to 2028 by thickness (thin and thick), end use industry (packaging, industrial, electrical and electronics, and others), and function (barrier, safety, decorative, microporous, and others)

Trends, opportunities and forecast in Footwear Sole Material Market in MENA to 2028 by material (rubber, PVC, TPR, PU, EVA, vulcanized rubber, leather, and others), by sole component (midsole, insole, and outsole), and by product (athletic and non-athletic), and by end user (men, women, and children)

Trends, opportunities and forecast in Mineral Wool Insulation Market in MENA to 2028 by product type (blanket [batts and rolls], rigid board, loose fill materials, and other forms), end use industry (residential construction, non-residential construction, industrial and HVAC, and appliances and others), and material type (glass wool insulation and stone wool insulation)

Trends, opportunities and forecast in Elastomeric Foam Insulation Market in MENA to 2028 by product type (closed cell and open cell), end use industry (building and construction, automotive, industrial, electrical and electronics, healthcare, and others), and function (thermal insulation, acoustic insulation, and others)

Trends, opportunities and forecast in Functional Polymer Market in MENA to 2028 by end use industry (automotive, packaging, electrical and electronics, construction, consumer goods, medical, industrial, and others), polymer type (PP, PE, polyolefin, epoxy, PU, polyamide, polyester, EVA, acrylic, butadiene, and others), functional group (anhydride based functional polymer, silicone based functional polymer, hydroxyl based functional polymer, and urethane based functional polymer), and process type (direct functionalization and post functionalization)

Trends, opportunities and forecast in Odor Control Agent Market in MENA to 2028 by application (water treatment, air purification, food and beverage processing, and others), material type (activated carbon, bio-enzymes, and other chemicals), and product form (powder, liquid, granular, and others)

Trends, opportunities and forecast in Recycled Carbon Fiber Market in MENA to 2028 by end use industry (aerospace, transportation, consumer electronics, sporting goods, and others) and product type (non woven mats, chopped carbon fiber, and milled carbon fiber)

Trends, opportunities and forecast in High Performance Glass Fiber Market in MENA to 2028 by end use application (transportation, construction, aerospace and defense, wind energy, and others), product type (S-glass, R-glass, and T-glass), and product form (roving, chopped, and yarn)

Trends, opportunities and forecast in FRP Pole Market in MENA to 2028 by end use industry (power transmission and distribution, telecommunication, lighting, and others), process (filament winding, pultrusion, and centrifugal casting), and material consumption (resin and fiber)

Trends, opportunities and forecast in Low Density SMC Market in MENA to 2028 by automotive application (deck lids, fenders, bumpers, hoods and body panels, & others), fiber type (glass fiber and carbon fiber), and resin type (polyester, vinyl ester and epoxy)

Trends, opportunities and forecast in Composites Repair and Rehab Market for the Construction Industry in MENA to 2028 by application (civil infrastructure, existing and historic buildings, parking structures, and others), fiber type (carbon fiber composite, glass fiber composites, and others), and end use (civil and residential)

Trends, opportunities and forecast in Composite Surface Film Market in MENA to 2028 by end use type (aerospace & defense, automotive, and others), application (fuselage, wings, empennage, other aerospace components, automotive body panels, and others), and function type (surface preparation and protection films, and surface films with LSP)

Trends, opportunities and forecast in Pultrusion Market in MENA to 2028 by application (window profiles, window profiles, rebar, ladder rails, cable trays, electric insulators, decking, grating, road markers, sound barriers, sporting goods ,tool handles ,utility poles, structural shapes, transportation, antennas, and others), property type (corrosion and non-corrosion), and end use industry (chemical, infrastructure, building and construction, consumer goods, cooling tower, transportation, and wind energy)

Trends, opportunities and forecast in Non-Woven Textile in Composites Market in MENA to 2028 by end use industry (aerospace & defense, transportation, wind energy, marine, construction, and others), product type (non crimp textiles and CSM/CFM), and material type (glass fiber, carbon fiber, natural fiber, and others)

Trends, opportunities and forecast in Prepreg Market in MENA to 2028 by end use industry (commercial aerospace, military/defense, general aviation, space/satellite, sporting goods, marine, wind energy, automotive, civil engineering, and others), type of prepreg (thermoset prepreg, and thermoplastic prepreg), resin type (epoxy, phenolic, BMI, cynate ester, and thermoplastics), fiber type (glass fiber, carbon fiber, and aramid fiber), and weave type (UD prepreg, and fabric prepreg)

Trends, opportunities and forecast in High Temperature Composite Resin Market in MENA to 2028 by end use industry (aerospace & defense, pipe & tank, electrical/electronics, and others) and resin (epoxy, vinyl ester, phenolic, BMI, cyanate ester, PEEK, and others)

Trends, opportunities and forecast in Automotive Composite Suspension Components Market in MENA to 2028 by component (leaf spring, coil spring and stabilizer bar), vehicle (passenger car and light commercial vehicle, medium and heavy commercial vehicle and others), and process (resin transfer molding, prepreg lay-up, and compression molding)